Tur-a-dex Unit Data	Unit Data
No. Turret Faces	2 to 8
Thrust Capacity	13,000 lbs
Main Motor (AC or Servo)	7 1/2 HP
Maximum Weight of Tooling	1600 lbs
Unit Mounting Surface	#3 Slide Unit
Angle of Turret Index	45 Degrees
Unit Working Plane	Horizontal
Unit Weight Less Tooling	1275 lbs
Unit Tolerances	Unit Data
Station Repeatability	+/- .0003
Station to Station Accuracy	+/- .0009
Center line of Drive to Base	+/- .001
Turret Face to Turret Face	+/- .001
Turret Face Squareness to Base	+/- .0005 in 12"
Unit Index Time*	Unit Data
2-Station	6 seconds
3-Station	4
4-Station	3
5-Station	3
6-Station	3
8-Station	3

*Index time may vary depending on tooling weight
 

Auxiliary Data

1) Unit is furnished with air and coolant ports through the center turret post.

2) Electrical control switch through the center turret post for probe and lead screw tapping control is available.

3) Four (4) quick acting clamps are utilized to clamp the multiple spindle head to the turret

4) Maximum speed for the main drive motor is 4000 RPM.

5) Unit has a servo index mechanism.
 
 

The center line of spindles can be located anywhere within the standard area shown. However, these dimensions can be expanded easily to accommodate your specific requirements. For example, the height can be expanded simply by adding a riser between the Tur-a-dex base and slide saddle to provide adequate clearance during indexing. Contact us for your special requirements.